2in1 Base Coat & Extension Gel Adhesive (2025)

APPLICATION

Apply as a Base Coat: Before applying your One Step Gel Polish or Builder Gel XL, apply 1 coat of our Optional Base Coat to your natural buffed nails and cure for 60 seconds in your Ezmio Nail Lamp. You are now ready to apply the One Step Gel polish of your choice, or your Builder Gel XL.

Apply as Extension Gel Adhesive: Before applying your Ezmio Extensions, apply 1 coat of our Extension Gel Adhesive on your nail, leaving a large gap between the sides of your nail and cuticle, follow by applying a small amount on the inner cuticle side of your Extension before placing on your nail. Cure for 60s under your Esmio Nail Lamp.

Please Note: This product will dry with a tacky finish so you are required to immediately apply your One Step Gel polish of choice, or alternatively wipe your nail with rubbing alcohol.

REMOVAL

Remove as a Base Coat:

1. Buff off the first coat of your One Step Gel Polish using our 100/180 grit file. The shine should be removed from all nails.

2. Apply 1 thick coat of our One Step Gel Remover to your buffed nails (ensure you do not get any on your skin). Once applied to all nails, wait 30 seconds and repeat with a second coat.

3. Wait 3-5 minutes for our One Step Gel Remover to penetrate the One Step Gel Polish. You should feel a slight tight sensation as the polish lifts off your nails. This is perfectly normal!

4. Once the One Step Gel Polish is flaky, use our Pro Scraper Tool to remove the gel polish off your nails.

5. If there is excess One Step Gel Polish you can repeat this process above.

6. Use our Soft Buffer Block to lightly buff away any left over residue.

7. Lastly, give your hands a wash and you are ready to go!

Remove as Extension Gel Adhesive:

1. Trim your Gel Nail Extensions to match your natural nail length using ourPro Nail Cutter.

2. To remove your Soft Gel Nail Extensions, utilise theExtension Removal Fileto file off all gel until you reach your extension.

3. Apply two coats of ourOne Step Gel Remover, ensuring careful application to avoid contact with the skin. Allow 30 seconds between each coat.

4. Allow 3-5 minutes for ourOne Step Gel Removerto effectively penetrate the Gel Extension. Sensations of slight tightness indicate the lifting of the gel extension from the nail, which is a normal occurrence and will subside.

5. Once you observe your extensions becoming gooey in texture, place your nails (one at a time) on a tissue. Using the flat edge of ourPro Scraper Tool, push the extension down towards the tissue. Note that the extensions will solidify after removal, so it's essential to complete this step on a tissue.

6. If any excess Gel Extension remains, repeat the aforementioned process.

7. Use ourSoft Buffer Blockto gently remove any remaining residue.

8. Give your hands a wash, and you are ready for your next manicure!

12-Free

What does 12-Free mean? It means that we are not using the 12 most harmful chemical ingredients commonly found in other gel polish lines.

Ezmio gel polish does not contain:

Formaldehyde - Formaldehyde is primarily used in gel polish as a hardening agent. It is a known carcinogen and can lead to skin irritation, allergic responses, and has been associated with the development of nasal and lung cancers.

Toluene - That familiar, nostalgic yet potent scent emanating from certain nail polishes is attributed to Toluene. This compound plays a crucial role in ensuring the even distribution of color pigments, resulting in a flawless finish upon application. However, Toluene's exposure has been associated with adverse effects on the nervous system, including headaches, nausea, and eye irritation. Most significantly, it has been linked to the risk of birth defects.

Dibutyl Phthalate (DBT) - DBP functions as both a plasticizer and solvent in nail polish formulations, enhancing flexibility and reducing the likelihood of chipping. However, absorption of this chemical through the skin has been associated with reproductive problems, birth defects, and fertility issues.

Camphor - Synthetic camphor is used to achieve a highly glossy appearance, however prolonged exposure may result in symptoms such as nausea, dizziness, and headaches.

Formaldehyde Resin - Formaldehyde Resin serves as a nail hardening agent. However, it may provoke skin irritation and pose toxicity risks to the immune system.

Xylene - Xylene is utilized to thin nail polish, preventing it from becoming excessively clumpy. It is commonly found in the production of cement and gasoline. Due to its potent fumes, excessive exposure or skin absorption can potentially harm the renal system, liver, and kidneys.

Parabens - Parabens are used widely in the cosmetic industry as a preservative. Due to the estrogen mimicking effects it has been linked to hormonal abnormalities.

Fragrances - Fragrances are incorporated into polish to impart specific scents. Yet, they typically consist of proprietary blends of various components, which may induce skin irritations like redness, itching, hives, and exacerbate eczema.

Phthalates - Phthalates are employed to impart flexibility to products, allowing them to bend in a desired manner. However, these chemicals have been associated with certain types of cancer.

Ethyl Tosylamide - Ethyl Tosylamide serves as a chemical in nail polish, functioning as both a plasticizer and film-forming agent. Its role is to improve the polish's flexibility and durability, thereby contributing to extended manicure longevity.

Triphenyl Phosphate (TPHP) - Triphenyl Phosphate is commonly present in nail polish as both a plasticizer and flame retardant. While it can increase the flexibility of nail polish, concerns regarding its potential side effects have been raised due to health implications.

Hema – Hema is a commonly used ingredient in the nail polish industry and serves to provide adhesion and durability. Prolonged exposure to uncured HEMA products is linked to causing irritation and allergic reactions.

All orders are packed within 1-2 business days of purchase regardless of the shipping method selected at checkout. Dispatch may be delayed during a sale period.

Shipping is free on all Australian orders over $150. Standard shipping is $10 and Express shipping is $15. For international shipping and more info click here.

Returns are accepted within 14 days of purchase on the basis that the item is unused and in the exact same condition that you received it in, including the original packaging. Any item that has been tampered with and is returned more than 14 days after delivery will not be accepted. To read our Shipping Policyclick here.